This picture is taken from above the engine compartment, looking almost straight down. Note the hood latch in the lower-left hand corner of the picture. The bottom of the photo is toward the front of the van. In the center of the picture you'll see the two transmission cooler lines. Each line has a metal portion that's attached to the transmission, then it transitions to a rubber tube (to absorb vibration) and then back to metal again, which continues to fittings on the radiator. I cut the rubber tube of the lower line (which is the transmission intake) and used a short piece of metal tubing and two hose clamps to attach my tubing. If you look very closely, you'll just see the edge of one of the hose clamps I added. It's almost exactly in the center of this picture (sorry; there isn't a great sight line available for a clearer picture)