Album Info:
Note the board wedged in at an angle. It is approx 27" long and 10" high. I placed the boatrd against the sides then placed a piece ,of trim against the right side to hold it in. I used only one screw in the middle of the trim to anchor it to the wall. I cut a hole in the top center of the board sop it can be lifted out easily to allow access to the valves. The dark piece of wood is a 1/4" nailed and glued to the bottom of the new divider. It covers the outside shower valves.
Sample Email
Below is what we'll send to your friends to invite them - edit or remove the optional note.
No comments so far...
To be able to leave a comment please Log in or Sign up.