Ford 450 4x4 Crewcab Cummins Conversion
CumminsDork > albums
-
Final build 3" to 3.5" to 4",.....Looks like a big ####...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
4in under the truck. I reached in there with a die grin...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Milled sum slots for the exh. brace
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Final build exh.brace
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Mounted
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
4in under the truck. The offset wus bought from Int. th...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
pipe behind muffler, turns up behind cab
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
4in. to 5 in. adapter then welded to chrome stack with ...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Motor sits purdy level
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Level reads 5.5 but I set it at 4.5 degrees,...I lost t...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Final turbo clearence with 16cm housing
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Final turbo clearence
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Dow pin killed
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Had to cut 2 extra notches in bal. so the ford tach wo...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Cuttin two more notches Ez setup, just divide the dista...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Equal on both sides,....Good to go.
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Cuttin two more notches (10)
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Checkin depth,...this prolly doesn't hafta be this exac...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Balancer installed with dowpin killed and new seal
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Cut that hold down post off for clearence
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
DSC02202
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Not much room for lower rad hose because of a/c compres...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
Cut a barbed end on 2 3/8 #####
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
lower rad pipe 2 3/8 pipe with weld ell
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
hose is off a DT 466 sumtin??? It has a Over sized end ...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
lower pipe go's out into the wheel well and is welded t...
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
DSC02575
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
-
DSC02573
- last edit: Tue Apr 25 10:47:49 PDT 2006
- comments: 0
Album Description:
Album Info:
Album Stats:
- Photos: 98
- Views: 107089
- Downloads: 23
No comments so far...
To be able to leave a comment please Log in or Sign up.